LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Fan Shroud Replacement - Upper (W/O M74) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the upper fan shroud.
  2. Install the fan shroud bolts. Tighten the bolts to 9 N.m (80 lb in).
  3. Install the fan shroud retainers.
  4. Install the inlet radiator hose retainer to the fan shroud
  5. Install the throttle body heater hose retainer to the fan shroud.
  6. Install the air cleaner outlet duct.
  7. Tighten the air cleaner outlet duct clamp at the throttle body. Tighten the clamp screw to 7 N.m (62 lb in).
  8. Tighten the air cleaner outlet duct clamp at the mass airflow sensor. Tighten the clamp screw to 7 N.m (62 lb in).
scientia non olet · About LEMON Manuals