LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Cooling Fan Pulley Replacement (6.6L Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cooling fan pulley insulator pad.
  2. Install the cooling fan pulley assembly.
  3. Install the cooling fan pulley assembly bolts and nuts. Tighten the cooling fan pulley bolts and 2 nuts to 46 N.m (34 lb ft).
  4. Connect the camshaft position sensor connector.
  5. Install the fan clutch. Refer to Fan Replacement .
scientia non olet · About LEMON Manuals