LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Lumbar Cable And Front Seat Cushion Frame Components
    GM407184Courtesy of GENERAL MOTORS CORP.
  1. Install the following components to the seat cushion frame:
    • The plastic retainers (3)
    • The frame suspension (2)
    • The frame springs (1)
  2. Install the seat cushion trim cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
  3. Install the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
scientia non olet · About LEMON Manuals