LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Seat System) >> Repair Instructions >> Seat Back Recliner Handle Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Front Seat Back Recliner Handle & Bolt
    GM378527Courtesy of GENERAL MOTORS CORP.
  1. Position the recliner handle on the side shield.
  2. NOTE: Refer to FASTENER NOTICE .
  3. Install the screw retaining the recliner handle to the trim panel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).