LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Seat System) >> Repair Instructions >> Seat Adjuster Replacement - Front (Power) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  3. Remove the seat cushion frame from the seat adjuster. Refer to Seat Cushion Frame Replacement - Front .
    4. Fig 1: View Of Seat Belt Buckle, Nut & Electrical Connection
    GM381486Courtesy of GENERAL MOTORS CORP.
  4. Remove the inboard seat belt buckle and nut (1).

    Disconnect the electrical connection (2).

  5. Remove the seat back frame from the seat adjuster. Refer to Seat Back Frame Replacement - Front .
  6. Remove the seat back hinge/recliner mechanism. Refer to Seat Back Hinge/Recliner Mechanism Replace - Front .
  7. Remove the seat adjuster track cover. Refer to Seat Adjuster Track Cover Replacement - Front .
  8. Remove the memory module, if equipped. Refer to Memory Seat Control Module Replacement .
scientia non olet · About LEMON Manuals