LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat (Manual) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the head restraint and guides. Refer to Head Restraint Replacement (Non-Cadillac)  or Head Restraint Replacement (Cadillac)  or Head Restraint Replacement (Folding) .
  3. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
    4. Fig 1: Lumbar Clip
    GM408110Courtesy of GENERAL MOTORS CORP.
  4. Detach the lumbar clip from the top of the seat back frame.
  5. Rotate the top of the lumbar mechanism forward in order to unclip the lumbar mechanism from the bottom of the seat back frame.
    6. Fig 2: View Of Lumbar Cable And Front Seat Cushion Frame Components
    GM407184Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the lumbar cable (6) from the lumbar actuator (5).
  7. Remove the lumbar assembly from the vehicle.
scientia non olet · About LEMON Manuals