LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat (Manual) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the lumbar assembly to the seat.
    2. Fig 1: View Of Lumbar Cable And Front Seat Cushion Frame Components
    GM407184Courtesy of GENERAL MOTORS CORP.
  2. Connect the lumbar cable (6) to the lumbar actuator (5).
  3. Rotate the top of the lumbar mechanism in order to clip the lumbar mechanism onto the bottom of the seat back frame.
    4. Fig 2: Lumbar Clip
    GM408110Courtesy of GENERAL MOTORS CORP.
  4. Attach the lumbar clip onto the top of the seat frame.
  5. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  6. Install the head restraint and guides. Refer to Head Restraint Replacement (Non-Cadillac)  or Head Restraint Replacement (Cadillac)  or Head Restraint Replacement (Folding) .
  7. Install the front seat in the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals