LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Seat System) >> Repair Instructions >> Head Restraint Replacement (Non-Cadillac) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the head restraint (1) to the full up position.
  2. Insert a paper clip or a similar tool in the hole at the side edges of the head restraint retainers.
  3. Press in on the tool in order to release the retainer clips (2).
  4. Lift the head restraint from the retainers.
    Fig 1: Head Restraint & Retainers
    GM660154Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals