LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Seat System) >> Repair Instructions >> Head Restraint Replacement (Cadillac) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Head Restraint Access Hole
    GM756156Courtesy of GENERAL MOTORS CORP.
  1. Pull the head restraint to the full height position.
  2. Insert a pointed tool into the access hole (1) and press inwards.
  3. Pull the head restraint from the seat.
scientia non olet · About LEMON Manuals