LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Seat System) >> Repair Instructions >> Cupholder Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center seat. Refer to Seat Replacement - Center .
    2. CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
    Fig 1: Cupholder Rivets
    GM799077Courtesy of GENERAL MOTORS CORP.
  2. Remove the rivets (1) retaining the cupholder from the bottom of the center seat.
  3. Remove the cupholder.
scientia non olet · About LEMON Manuals