Turn Signal Switch Housing - Assemble - Off Vehicle (Standard)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The switch mounting bracket must be pressed firmly against the steering column tilt head.
- Slide the turn signal switch housing onto the steering column shaft assembly.
- Install the turn signal and multifunction switch assembly only. Refer to Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle .
- Install the turn signal cancel cam and upper bearing thrust. Refer to Turn Signal Cancel Cam and Bearing Thrust Washer - Assemble - Off Vehicle .
- Enable the inflatable restraint steering wheel module. Refer to ACTIVATING SYSTEM in SIR.