Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Tilt Spring & Spring Guide

Courtesy of GENERAL MOTORS CORP.

Lubricate the tilt spring (2) with synthetic grease.
Install the spring guide (1) into the tilt spring (2).

Fig 2: Installing Tilt Spring Onto The Steering Column Support Assembly

Courtesy of GENERAL MOTORS CORP.

Install the tilt spring (1).
1. Install the tilt spring (1) to the post on the steering column support assembly (2).
2. Secure the tilt spring (1) with locking pliers.
Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement - On Vehicle .