LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter - Right (Utility) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat. Refer to SEAT REPLACEMENT - REAR BENCH .
  2. Remove the Third Pillar trim panel. Refer to Trim Replacement - Third Pillar (Tahoe/Yukon/Escalade/Suburban)  or Trim Replacement - Third Pillar (Avalanche/Escalade EXT)  .
  3. Remove the garnish molding. Refer to Garnish Molding Replacement - Rear Corner  .
  4. Remove the door sill plate. Refer to Door Sill Plate Replacement - Liftgate  .
  5. Remove the quarter panel trim screws.
    6. Fig 1: Right Rear Quarter Trim Panel (Utility)
    GM276495Courtesy of GENERAL MOTORS CORP.
  6. Remove the quarter panel trim from the vehicle.

    Lift the quarter panel to release the quarter panel from the vehicle.

scientia non olet · About LEMON Manuals