LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Interior Trim) >> Repair Instructions >> Headliner Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the front section of the headliner and suitably support. Refer to Headliner Replacement  .
    Fig 1: Removing Rear Headliner
    GM700143Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector.
  3. Remove the rear corner moldings. Refer to Garnish Molding Replacement - Rear Corner  .
  4. Remove the rear upper trim molding. Refer to Garnish Molding Replacement - Rear Upper (Tahoe/Yukon/Escalade/Suburban)  or Garnish Molding Replacement - Rear Upper (Avalanche/Escalade EXT)  .
  5. Remove the rear coat hook.
  6. Carefully release the headliner from the roof support Velcro(R) retainers.
  7. Remove the headliner from the vehicle.
scientia non olet · About LEMON Manuals