LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Interior Trim) >> Repair Instructions >> Headliner Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Rear Headliner
    GM700143Courtesy of GENERAL MOTORS CORP.
  1. Install the rear section of the headliner to the vehicle.
  2. Secure the headliner to the roof support Velcro(R) retainers.
  3. Connect the electrical connector.
  4. Install the rear coat hook.
  5. Install the rear upper trim molding. Refer to Garnish Molding Replacement - Rear Upper (Tahoe/Yukon/Escalade/Suburban)  or Garnish Molding Replacement - Rear Upper (Avalanche/Escalade EXT)  .
  6. Install the rear corner molding. Refer to Garnish Molding Replacement - Rear Corner  .
  7. Install the front section of the headliner. Refer to Headliner Replacement  .
scientia non olet · About LEMON Manuals