LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Windshield Pillar Garnish Molding
    GM346858Courtesy of GENERAL MOTORS CORP.
  1. Ensure the bottom of the molding is seated in the slots on the I/P.
  2. Align the molding retainers to the slots.
  3. Press the moldings straight in till fully seated.
scientia non olet · About LEMON Manuals