LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Rear Door Upper >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove expanding plastic fasteners at window latch close-out.
    Fig 1: Rear Door Upper Garnish Molding
    GM575920Courtesy of GENERAL MOTORS CORP.
  2. Using the J 38778  , release the retainers from the retainer seats.
  3. Remove the trim panel from the liftgate.
scientia non olet · About LEMON Manuals