LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Rear Door Upper >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Door Upper Garnish Molding
    GM575920Courtesy of GENERAL MOTORS CORP.
  1. Align the retainers with the holes in the liftgate.
  2. Apply pressure to the seat retainers.
  3. Install the expanding plastic retainers at the window latch close-out.
scientia non olet · About LEMON Manuals