LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 681 (Parking Brake System) >> Repair Instructions >> Park Brake Cable Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cable.
  2. Snap the retainer tabs into the body mount.
  3. Connect the front cable to the intermediate cable.
  4. Route the cable in through the floor pan and engage the grommet.
  5. Remove the safety stands.
  6. Lower the vehicle.
  7. Roll the carpet into place.
  8. Install the park brake pedal. Refer to Park Brake Pedal Assembly Replacement .
  9. Adjust the park brake system. Refer to Park Brake Adjustment .
scientia non olet · About LEMON Manuals