LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 681 (Parking Brake System) >> Repair Instructions >> Park Brake Actuator Replacement (25/35 Series) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake.
  2. Raise and support the vehicle.
  3. Remove the tire and wheel assembly.
  4. Relieve the tension from the park brake cable by loosening the nut at the equalizer.
    5. Fig 1: Park Brake Cable Equalizer
    G01669283Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear park brake cable from the park brake actuator lever.
  6. Remove the rotor. Refer to BRAKE ROTOR .
  7. Remove the park brake shoe. Refer to Park Brake Shoe Replacement (Except RPO NYS, 25/35 Series)  or Park Brake Shoe Replacement (25/35 Series)  .
  8. Remove the actuator lever from the backing plate.
scientia non olet · About LEMON Manuals