LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 680 (Hydraulic Brakes) >> Repair Instructions >> Brake Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Brake pipes that run parallel to each other must maintain a 6 mm (1/4 in) clearance.

  1. Disconnect the brake pipe fittings.
  2. Remove the brake pipe fasteners from the vehicle.
  3. Remove the brake pipe from the vehicle.
scientia non olet · About LEMON Manuals