LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Automatic Transaxle Servicing) >> Removal & Installation >> Transaxle Mount Assembly (Rear) >> Removal

Transaxle Mount Assembly (Rear): Removal

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Remove the left front wheel.
  2. Remove the front fender liner. See Figure.
  3. Remove the mount-through bolt (1). See Figure. Remove the mount bolts. Remove the mount.