LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Automatic Transaxle Servicing) >> Removal & Installation >> Transaxle Mount Assembly (Rear) >> Installation

Transaxle Mount Assembly (Rear): Installation

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the mount. Install the mount bolts and tighten to specification. See TORQUE SPECIFICATIONS .
  2. Install the mount-through bolt. See Fig 2. Tighten the bolt to specification. See TORQUE SPECIFICATIONS .
  3. Install the front fender liner. See Fig 1. Install the left front wheel. Lower the vehicle.
Fig 1: Removal & Installing Left Front Fender Liner
G00088342Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Through Bolts
G00088343Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals