Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Amplifier (Denali Suburban)

Courtesy of GENERAL MOTORS CORP.

Install the amplifier to the vehicle.

NOTE: Refer to FASTENER NOTICE .

Install the amplifier retaining bolts (2).
Tighten: Tighten the screws to 9.0 N.m (80 lb in)
Connect the electrical connector (1).
Install the rear quarter panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (UTILITY) or TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (SUBURBAN) , or to TRIM PANEL REPLACEMENT - REAR QUARTER - LEFT (UTILITY) or TRIM PANEL REPLACEMENT - REAR QUARTER - LEFT (SUBURBAN) .