Finding a Station - Base Level: Am-Fm: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Press the tune knob in order to change the radio band between AM and FM. The display will indicate the current band and the last radio frequency that was selected on that band.
TUNE
- Rotate the TUNE knob clockwise in order to increase the AM or FM frequency.
- Rotate the TUNE knob counterclockwise in order to decrease the AM or FM frequency.
SEEK
- Press the right arrow button in order to tune into the next station higher in frequency.
- Press the left arrow button in order to tune into the next station lower in frequency.
SCAN
- Press both SEEK buttons in order to activate the SCAN mode.
- SCAN will appear on the display and the radio will stop at every station for a few seconds.
- Press the right arrow button in order to tune into the next higher station
- Press the left arrow button in order to tune into the next lower station.
- Press VOLUME or both SEEK buttons to stop scanning.