Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the mode actuator as an assembly with the actuator cam.
- Line up the heater/defroster lever with the mode actuator cam slot.
- Line up the A/C lever with the mode actuator cam.
- Install the mode actuator mounting screw to the HVAC module. Tighten the screw to 1.6 N.m (14 lb in).
- Connect the electrical connection at the mode actuator (10).
- Install the floor air outlet duct extension (1) to the floor air duct (2).