LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Suction Screen Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery & Recharging .
  2. Remove the A/C compressor hose assembly bolt.
  3. Separate the A/C compressor hose assembly from the A/C compressor.

    Important:  The suction screens are available in 3 different sizes.

  4. Select the proper size removal tool from the J 44551  .
  5. Remove the suction screen using the J 44551-31 suction screen removal tool.
    • Thread the forcing screw into the suction screen.
    • Tighten the nut on the forcing screw to remove the suction screen.
scientia non olet · About LEMON Manuals