LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Suction Hose Replacement (LB7 w/Denso) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the suction hose to the vehicle using new sealing washers.
  2. Install the suction hose to the accumulator.
  3. Install the NEW suction hose nut to the accumulator. Tighten the nut to 16 N.m (12 lb ft).
  4. Install the suction hose to the compressor (1).
  5. Install the NEW suction hose mounting bolt (3). Tighten the bolt to 16 N.m (12 lb ft).
  6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery & Recharging .
  7. Leak test the fittings of the component using the J 39400-A  .
scientia non olet · About LEMON Manuals