LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Heater Hose Replacement - Inlet (L35) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the inlet heater hose.
  2. Install the inlet heater hose to the engine.
  3. Reposition the inlet heater hose clamp to the engine.
  4. Install the inlet heater hose mounting bolt. Tighten the bolt to 25 N.m (18 lb ft).
  5. Install the inlet heater hose to the engine.
  6. Connect the heater hoses to the heater core. Firmly push the quick connect onto the heater core pipe until you hear an audible click.
  7. Install the air intake tube.
  8. Fill the cooling system.
scientia non olet · About LEMON Manuals