LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Evaporator Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the evaporator tube to the condenser using new sealing washers. Refer to Sealing Washer Replacement .
  2. Install the evaporator tube nut to the condenser. Tighten the nut to 16 N.m (12 lb ft).
  3. Install the grille to the vehicle.
  4. Install the right park/turn signal lamp.
  5. Install the evaporator tube to the evaporator.
  6. Install the evaporator tube nut to the evaporator. Tighten the nut to 16 N.m (12 lb ft).
  7. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery & Recharging .
  8. Leak test the fittings of the components using the J 39400-A  .
scientia non olet · About LEMON Manuals