LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Replacement (L35 W/Harrison) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Add the proper amount of PAG oil to the compressor crankcase. Refer to Refrigerant System Capacities .
  2. Install the A/C compressor drain plug. Tighten the drain plug to 20 N.m (15 lb ft).
  3. Install the compressor into the bracket.
  4. Install the compressor bolts. Tighten the bolts to 50 N.m (37 lb ft).
  5. Install the A/C compressor hose to the compressor using new sealing washers.
  6. Install the A/C compressor hose bolt to the A/C compressor. Tighten the bolt to 34 N.m (25 lb ft).
  7. Connect the electrical connections.
  8. Install the drive belt.
  9. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery & Recharging .
  10. Leak test the fittings of the component using the J 39400-A. 
scientia non olet · About LEMON Manuals