LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Clutch Coil Install (Denso)

Compressor Clutch Coil Install (Denso)

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the coil assembly to the compressor.
  2. Install the coil snap ring.
  3. Install the coil connector retaining bracket screw. Tighten the screw to 9 N.m (80 lb in).
  4. Install the clutch hub/bearing assembly.
  5. Install the clutch hub/bearing snap ring.
  6. Install the clutch plate assembly.
  7. Install the clutch plate retaining bolt (1). Tighten the bolt to 18 N.m (13 lb ft).
    Fig 1: Compressor Clutch Coil Components
    G01666457Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals