Removal Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Mark the position of the wiper blade on the windshield with a suitable marker or a piece of masking tape.
- Disconnect the washer hose.
- Remove the cover from the nut on the wiper arm.
- Remove the nut from the wiper arm.
- Remove the wiper arm from the drive shaft.
- Clean the knurls of the drive shaft with a wire brush.
IMPORTANT:
Use a battery terminal puller to remove the wiper arm from the drive shaft.