LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 674 (Engine Cooling System) >> Repair Instructions >> Thermostat Replacement (8.1L Engine) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Water Outlet, Bolts & Thermostat
    GM635643Courtesy of GENERAL MOTORS CORP.
  1. Install the thermostat (3).
  2. Install the water outlet (1).
    NOTE: Refer to FASTENER NOTICE .
  3. Install the water outlet bolts (2).

    Tighten:  Tighten the water outlet bolts to 30 N.m (22 lb ft).

    4. Fig 2: View Of Inlet Hose Clamp & Water Crossover
    GM751425Courtesy of GENERAL MOTORS CORP.
  4. Install the inlet hose to the water outlet.
  5. Position the inlet hose clamp at the water outlet.
  6. Fill the cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals