LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 674 (Engine Cooling System) >> Repair Instructions >> Thermostat Housing Replacement (4.8L, 5.3L, and 6.0L Engines) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Water Pump Inlet
    GM370076Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  1. Install the thermostat and water pump inlet to the water pump.
  2. Install the water pump inlet bolts.

    Tighten:  Tighten the water pump inlet bolts to 15 N.m (11 lb ft).

  3. Install the radiator outlet hose. Refer to RADIATOR HOSE REPLACEMENT - Inlet (4.8L, 5.3L, and 6.0L Engines)  or RADIATOR HOSE REPLACEMENT - Inlet (8.1L Engine) .
scientia non olet · About LEMON Manuals