LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 674 (Engine Cooling System) >> Repair Instructions >> Surge Tank Hose/Pipe Replacement - Inlet >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Surge Tank Outlet Hose & Surge Tank
    GM659059Courtesy of GENERAL MOTORS CORP.
  1. Install the surge tank inlet hose (1) to the surge tank.
  2. Position the surge tank inlet hose clamp to the surge tank.
  3. Fig 2: View Of Surge Tank Inlet Hose & Radiator
    GM404039Courtesy of GENERAL MOTORS CORP.
  4. Install the surge tank inlet hose to the radiator.
  5. Position the surge tank inlet hose clamp to the radiator.
  6. Fill the cooling system. Refer to Draining and Filling Cooling System .