Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Outlet Hose At Radiator

Courtesy of GENERAL MOTORS CORP.

Install the outlet hose to the radiator.
Reposition the outlet hose clamp to the radiator.

Fig 2: View Of Outlet Hose & Water Pump

Courtesy of GENERAL MOTORS CORP.

Install the outlet hose to the water pump.
Reposition the outlet hose clamp to the water pump.

Fig 3: View Of Air Cleaner Outlet Duct (W/HP2 Front)

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Align the arrow at the throttle body end of the duct with the throttle body attaching stud.

Install the air cleaner outlet duct.
Install the radiator inlet hose clip to the outlet duct.

NOTE: Refer to FASTENER NOTICE .

Tighten the air cleaner outlet duct clamps at the following locations:
- Throttle body
- MAF/IAT sensor
  Tighten: Tighten the air cleaner outlet duct clamp screws to 7 N.m (62 lb in).
Fill the cooling system. Refer to Draining and Filling Cooling System .