LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 674 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Cord Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Coolant Heater Cord & Electrical Connector
    GM661139Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to LIFTING & JACKING THE VEHICLE .
  2. Disconnect the coolant heater electrical connector (2).
    3. Fig 2: View Of Coolant Heater Cord, Retainer & Bolts
    GM661277Courtesy of GENERAL MOTORS CORP.
  3. Remove the coolant heater cord retainer and bolts.
  4. Remove the coolant heater cord.
scientia non olet · About LEMON Manuals