LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 673 (Bumpers) >> Repair Instructions >> Fascia Support Replacement - Front Bumper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fender liners. Refer to FRONT FENDER LINER REPLACEMENT .
  2. Remove the bolts from the front bumper fascia side supports at the bottom of the fender.
    3. Fig 1: Identifying Front Bumper Fascia Support
    G01755620Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts from the front bumper fascia side supports at the radiator support.
  4. Remove the front bumper fascia side supports from the front bumper fascia.
scientia non olet · About LEMON Manuals