LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 673 (Bumpers) >> Repair Instructions >> Fascia Support Replacement - Front Bumper Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the headlamps. Refer to HEADLAMP ASSEMBLY OR HEADLAMP BULB AND/OR CORNERING, SIDEMARKER, PARK, TURN SIGNAL BULB REPLACEMENT .
  3. Remove the bolts from the center support bracket.
  4. Remove the bolts from the front upper bumper fascia support at the radiator support.
  5. Remove the front bumper fascia upper support from the front bumper fascia.
    Fig 1: Identifying Front Bumper Upper Fascia Support
    G01755622Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals