LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 673 (Bumpers) >> Repair Instructions >> Energy Absorber Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear bumper energy absorber to the rear bumper impact bar.
  2. Install the push-in retainers for the rear bumper energy absorber to the rear bumper impact bar.
  3. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper .
    Fig 1: Identifying Rear Energy Absorber
    G01755641Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals