LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 672 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Positive Cable Replacement - Battery to Battery Relay - Auxiliary >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Auxiliary Battery
    GM662692Courtesy of GENERAL MOTORS CORP.
  1. Install the auxiliary battery positive cable.
  2. Clip the mega fuse to the auxiliary battery tray.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the auxiliary battery positive cable nut.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

  4. Position the boot to cover the stud.
  5. Install the auxiliary battery. Refer to Battery Relay Replacement - Auxiliary .