LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Wheelhouse Inner Panel Extension Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Wheelhouse Inner Panel Extension
    GM874778Courtesy of GENERAL MOTORS CORP.
  1. Install the rear wheelhouse inner panel extension to the vehicle.
  2. NOTE: Refer to FASTENER NOTICE .
  3. Install the retainers to the inner panel extension rear.

    Tighten:  Tighten the retainers to 1.7 N.m (15 lb in).

  4. Install the retainers to the inner panel extension front.

    Tighten:  Tighten the retainers to 1.7 N.m (15 lb in).

  5. Install the retainer strap to the backside of the inner panel extension (1).