LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Weatherstrip Replacement - Endgate (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Endgate Weatherstrip (Avalanche)
    GM741580Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Prior to installing the weatherstrip, ensure that the area is clean and free of foreign material.
  1. Starting from either side, install the weatherstrip by inserting the groove to the endgate opening flange.
  2. Close the endgate.
  3. Inspect for interference.
scientia non olet · About LEMON Manuals