LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Trim Panel Replacement - Rear Door >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Rear Door Trim Panel
    GM575918Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper trim panel. Refer to Garnish Molding Replacement - Rear Door Frame .
  2. Slide the trim panel upward to disengage the mounting hooks.
  3. Remove the trim panel from the rear door.