LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Trim Panel Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper trim panel. Refer to Garnish Molding Replacement - Liftgate .
    2. Fig 1: Releasing Liftgate Trim Panel Clips
    GM575910Courtesy of GENERAL MOTORS CORP.
  2. Pry gently with a thin-bladed tool in order to release the clips.
    3. Fig 2: Removing Liftgate Trim Panel
    GM575912Courtesy of GENERAL MOTORS CORP.
  3. Slide the trim panel upward to disengage mounting hooks.
  4. Remove the trim panel from the liftgate.
scientia non olet · About LEMON Manuals