LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Trim Panel Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the trim panel to vehicle.
  2. Fig 1: Installing Liftgate Trim Panel Clips
    GM575910Courtesy of GENERAL MOTORS CORP.
  3. Slide the trim panel downward to engage mounting hooks.
  4. Install the upper trim panel. Refer to Garnish Molding Replacement - Liftgate .
  5. Install the pull strap.