Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the striker.
Tighten: Tighten the striker bolts to 9 N.m (80 lb in).
- Close the midgate.
- Inspect for correct operation of the midgate.
- Install the rear removable rear glass.
- Return the rear seat to the upright position.
NOTE:
Refer to FASTENER NOTICE
.
IMPORTANT:
Ensure the mounting surface on the body is cleaned and free of any debris.