LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Rear Body Opening Frame Midgate Drain Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the mid gate.
  2. Fig 1: Raising Close Out Panel On Load Floor Grate
    GM804456Courtesy of GENERAL MOTORS CORP.
  3. Raise the close out panel on the load floor grate and support in the raised position.
  4. Fig 2: Removing Rear Body Opening Frame Midgate Drain Valve
    GM804453Courtesy of GENERAL MOTORS CORP.
  5. Using a flat bladed tool or suitable replacement to pry the front drain valve from the floor.
  6. Remove the valve from the vehicle.