LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Rear Body Opening Frame Midgate Drain Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Rear Body Opening Frame Midgate Drain Valve
    GM804453Courtesy of GENERAL MOTORS CORP.
  1. Install the mid gate drain valve into the floor.
  2. Press down on the mid gate drain valve using firm pressure to firmly seat the valve into the floor.
  3. Lower the load floor grate close out panel.
  4. Close the mid gate.
scientia non olet · About LEMON Manuals